Painted bathroom vanity– First step to painted bathroom vanity is perform cabinet drawers and put in the paper near the cockpit. Take the door off its hinges by removing the screwdriver and set aside. Remove all knobs and handles and set aside. Tape the bottom of the vanity top and the floor around the bottom of the vanity with masking tape.Buff gently rolled across the wooden part of the cabinets, doors and drawer fronts with sandpaper. Buff in light, brightness short for rolling off strokes, but not leaving visible lines on the surface depth. Dust all residue with a dry clothApply primer seal from the top spot cabinet work down, then make the doors and drawer fronts. Brush thin uniform layer painted bathroom vanity, with their strokes after the long sides of the box. Avoid drips. Apply a thin first layer of painted bathroom vanity, back to work from the highest to the lowest in Stokes slow with long forms of the cabinets, doors and drawer fronts points. Cover the choke fully, then let the paint dry. Apply a second thin film in the same way as the first. After it dries, then replace the cabinet doors with hinges and knobs and handles put back.
Best Painted Bathroom Vanity
Painted bathroom vanity is quite less expensive than painting the walls of the bathrooms and the replacement of all furniture or bathroom floor. This partial remodeling project bathroom also needs less time to complete, of course. So you can definitely save more time and money. In painting your old vanity sure you do not need to spend much money to buy a lot of wall paintings. You do not also need more time and energy to paint large space. This way you can definitely get many advantages.
12 Picture Gallery: Laminate Painted Bathroom Vanity
In painted bathroom vanity, prepare several things first. Before repainting bathroom vanity, be sure to thoroughly clean and remaining paint or first layer off. You can scrape metal spatula and heavy sand with sand paper, after precious steps now have to remove drawers and doors of your bathroom vanity. Remember to also remove hinges, knobs and controls, so you can paint surface more easily without staining hardware.
You can then continue his project of painted bathroom vanity. In this last part can be painted directly on vanity of thin layer first. Wait until first coat to dry completely then you can do same step for second layer. If you want to add polyurethane layer, then you should do so before second layer.
This post topic: Bathroom Vanity